Sennheiser Tourguide Wireless Transmitter SR 2020 D - Manual (Page 21)

19
Operating the SR 2020 D
Selecting the input signal (“Input”)
You can connect either a condenser microphone or any other
audio source (e.g. CD and MP3 player, see page 6) to the
transmitter.
To select the input signal:
̈
Select the “ Input ” menu.
̈
Press the SET button
´
to display the current setting ( Mic /
Line ).
̈
Use the
̆
/
̄
rocker button
¿
to select the desired input
signal:
̈
Press the SET button
´
to store the selected input signal.
Adjusting the sensitivity of the Mic/Line input (“Sensitiv”)
If you connect a microphone to the transmitter, the microphone
signal
has to be amplified by the transmitter. Other audio
sources can be amplified, if their audio signal is too low.
To adjust the input sensitivity:
̈
Select the “ Sensitiv ” menu.
̈
Use the
̆
/
̄
rocker button
¿
to change the setting. The
Mic/Line level display
ባ
should show full deflection during
the loudest passages.
´
¿ ´
You connect ... Select
a condenser microphone? Mic
an external audio source? Line