Sennheiser Tourguide Wireless Transmitter SR 2020 D - Manual (Page 15)

13
Putting the SR 2020 D into operation
Connecting an external audio source to the transmitter
̈
Connect the line output of the external audio source to the
XLR-3F socket
¾
of the transmitter.
Connecting a condenser microphone
The microphone input of the SR 2020 D transmitter is
exclusively designed for use with condenser microphones.
Suitable microphones are listed on page 6.
̈
Connect the condenser microphone to the XLR-3F socket
¾
of the transmitter.
Connecting the headphones
The Mic / Line level display
ባ
displays the strength of the input
signal (see page 8). The SR 2020 D transmitter also features a
headphone output for monitoring purposes.
To monitor the audio signal via headphones:
̈
Set the headphone volume control
·
to the lowest volume
by turning it to the left as far as possible.
̈
Connect headphones with a ¼” (6.3 mm) stereo jack plug to
the headphone output
³
.
̈
Put the headphones on.
̈
Gradually turn up the volume.
2
¾
2
¾
ባ
Danger of hearing damage!
Listening at high volume levels for long periods can
lead to permanent hearing defects.
̈
Use the headphone volume control (VOL)
·
to
set the volume for the connected headphones to
the minimum before putting the headphones on.
CAUTION!
·
³