Sony PlayStation - Manual (Page 8)

8 EN Playing a game
1 Press OPEN.
The disc cover opens.
Insert a disc in the disc holder with the
label side up.
Close the disc cover.
Press the POWER button.
The POWER indicator lights up.
After the start-up screen, screen C1
appears and the game starts.
Set the supplied Analog Controller to the
appropriate mode for the software (see page 10).
Tips
• You can also start the game by inserting a
“PlayStation” format CD-ROM disc after screen C2
appears.
• If screen C3 appears, the disc that was inserted may
not be a “PlayStation” format disc. Check to ensure
that it has both the “PlayStation” logo and
designation on it.
• You can also play a game using the optional Mouse
(SCPH-1090).
Note
You do not have to turn off your “PlayStation“ when
changing discs.
M WARNING
Before removing a disc, press the OPEN button and make
sure that the disc completely stops.
Never touch the disc while it is moving. Otherwise, you
may injure yourself and may cause damage to the disc
and/or the “PlayStation”.
A B
2 3 1
C
A To restart the game
Press RESET.
Be careful not to press RESET while playing the
game, or the game will end.
B To remove the disc
Press OPEN.
While pressing the pivot gently, pick up the
disc holding the edges.
C Screens that appear after
the start-up screen
When you turn on your “PlayStation”, one of
the following screens will appear:
1 A CD-ROM with both the “PlayStation”
logo and designation is
inserted.
2 No disc is inserted.
3 A disc that cannot be played with the
“PlayStation” is inserted.
RESET
2
3
4
OPEN