Sony CCTV Systems - Manual (Page 47)

51
TIME LAPSE VIDEO RECORDERS
•Adaptive Picture Control (APC) delivers optimum
picture quality to the recording image
•A tape recorded in the 3-hour mode can be played
back by any S-VHS or VHS VCR
•Audio recording and playback are possible in 3, 12 and
24-hour modes
•Built-in time and date generator allows time and date
information to be displayed along with the Alarm count
and Recording/Playback speed
•Various recording modes such as Auto Repeat
Recording, Timer Recording and Alarm Recording for
versatile situations
•Holiday setting function
•Daylight Saving Time setting function
•Quick recording check function
•By using alarm recall and scan functions, pictures
recorded during alarm mode can be easily checked
•Field-by-field picture playback capability
•External timer input capability
•Automatic clock adjusting is possible when several
VCRs are connected
•On-screen display permits easy-to-follow operation
•Auto head cleaning function
•Tape before-end signal output capability
•Warning signal output capability
•Buzzer setting function
•Power-failure protection for up to 30 days
•Security lock function for avoiding accidental operation errors
•External control capability via an optional RS-232C interface
•Remote control capability of basic operational functions
through ø3.5mm mini jack
SVT-S3050P
General
Tape format: S-VHS or VHS
Power requirements: AC 220 to 240 V, 50/60 Hz
Power consumption: 18 W
Operating temperature: 5 to 40°C (41 to 104°F)
Operating humidity: Less than 80%
Dimensions: 420 (W) x 100 (H) x 349 (D) mm
(16
5 / 8 x 4 x 13 1 / 2 inches)
Mass: Approx. 5.8 kg (12 lb 9 oz)
Tape speed: 23.39 mm/sec (3-hour mode)
Recording/playback time: 3, 12, 24, 48, 72, 96, 120 and 168 hours
(with an SE/E-180 tape)
Alarm recording speed: 3, 12-hour mode, NC* 1
Alarm recording duration: 20 s, 1 m, CC* 2
Fast forward/rewind time: Approx. 4 minutes (with an SE/E-180 tape)
Video
Recording Playback system: Rotary four-head helical scanning system
Luminance signal: FM recording
Colour signal: Low-pass band-pass
transformation direct recording
Input: BNC: 1.0Vp-p, 75
Ω
, unbalanced
S -VIDEO: Mini DIN 4-pin
Y: 1.0Vp-p, 75 Ω , sync negative
C: 0.3 Vp-p, at burst level, 75 Ω
Output: BNC: 1.0 Vp-p, 75
Ω
, unbalanced
S -VIDEO: Mini DIN 4-pin
Y: 1.0 Vp-p, 75 Ω , sync negative
C: 0.3 Vp-p, at burst level, 75 Ω
Horizontal resolution: Colour mode: More than 400 TV lines (S-VHS)
Black & White mode: More than 400 TV lines (S-VHS)
Signal-to-noise ratio: 45 dB (S-VHS)
Audio
Audio recording mode: 3, 12 and 24-hour mode
Input: -7.8 dBu, 47 k
Ω
(phono jack)
Output: -7.8 dBu, 600 Ω (phono jack)
Microphone input: -60 dBu, 600 Ω (ø3.5 mm minijack)
Others
Alarm input: Low level
Alarm output: +5 V, 5.7 k
Ω
(Low active)
Switch output: +5 V, 5.7 k Ω (Low active)
Tape end output: +5 V, 5.7 k Ω (Low active)
Warning output: +5 V, 5.7 k
Ω
(Low active)
Timer output: +12 V, 5.7 k Ω (high active)
External timer input: Low level
Clock set output: +5 V, 5.7 k Ω (Low active)
Clock set input: Low level
Series output: +5 V, 5.7 k
Ω
(Low active)
Series input: Low level
Control terminals: ø3.5 mm mini jack
Optional RS-232C interface (D-sub 9-pin)
Notes: *1 No change of recording speed
*2 Stays an alarm for as long as the alarm input remains active.
0 dBu = 0.775 Vrms
S-VHS Time Lapse Videocassette Recorder
SVT-S3050P
Specifications
•High horizontal resolution of 400TV lines using S-VHS format
•Excellent signal-to-noise ratio of 45 dB
•7 different time lapse recording/playback modes are
available in addition to the standard mode (3 hours
time mode) with a normal 180-minute tape
Note: In time lapse modes, it is possible to additionally record three hours longer than the original modes.
TIME MODE (h) 3 12 24 48 72 96 120 168
INTERVAL (s) 1/50 0.1 0.18 0.34 0.5 0.66 0.82 1.14
Supplied accessories
AC power cord (1)
Operation manual (1)
Optional accessory
SVT-RM10 Remote Control Unit
RS-232C interface board SVT-RS1A
TLV parts kit TPK-885P
Rear Panel