Sony CCTV Systems - Manual (Page 54)

58
MONITORING CODECS
Monitoring Codec
PMS-500P/400P *
PMS-500P (Receiver/Transmitter)
PMS-400P (Transmitter)
*These models are available only in Europe. For details, please contact your nearest Sony office.
Video Voice Control data
Send Receive Send Receive Send Receive
PMS-500P Yes Yes Yes Yes Yes Yes
PMS-400P Yes No Yes Yes Yes Yes
•PMS-500P and PMS-400P Comparison
PMS-500P
PMS-400P
Rear Panel
Supplied Accessories
Operating instructions (1)
AC power cord (1)
Optional Accessory
RM-R500 remote contorol unit (for PMS-500P only)
(Both PMS-500P/400P)
• Transmission of smooth and clear, video at a maximum
of 15 frames per second via ISDN line
• Selectable video mode (Fast/Normal/Fine) in
monitoring
• Accepts 8 camera inputs which are selectable from a
control centre or local terminals
• I/O port to control camera pan/tilt and zoom lens
• Relay output port to control external devices (ie; door, light)
• Transmission and receiving capability of audio which
allows conversation between two sites
• When an alarm signal is input to a terminal, it
automatically activates the control centre to switch the
monitor to watch that terminal
• Easy connection, just by connecting to an ISDN
modular jack
• Compatible with a wide range of cameras, monitors,
and TLV equipment
• Remote control with the RM-R500 Remote Control Unit
• Password protection
• An RS-232C serial interface for PC control
• Remote diagnostics
RM-R500 Remote Control Unit