Hsr-1p, Time lapse video recorders, Supplied accessories – Sony CCTV Systems User Manual

Page 50: Optional accessory, Specifications

Advertising
background image

54

TIME LAPSE VIDEO RECORDERS

Supplied accessories

AC power cord (1)
Operation manual (1)

Optional accessory

HSRA-11 (Input Board)
SVRM-100A (Remote Control Unit)

HSR-1P

General

Mass

10 kg (22 lb 1 oz)

Dimensions

355 (W) x 125 (H) x 410 (D) mm
(14 x 5 x 16

1

/

4

inches)

Power requirements

AC 220 V~240 V, 50/60 Hz

Power consumption

80 W (without options)
115 W (with full options)

Operating temperature

5°C ~ 40°C (41°F ~ 104°F)

Operating humidity

Less than 80%

Usable tape

DV*1 or DVCAM*2 cassette tape
(standard size, mini size)

HDD capacity

More than 4.3 GB

System

Video signal

CCIR standard, PAL colour

Recording system

Rotary two-head helical scanning system
Digital components

Quantization

8-bit

Sampling frequency

13.5 MHz (4:2:0 components)

Recording/Playback time

Maximum 9999 hours (Approx. 400 days)

Fast forward/Rewind time

Less than 3 min. (with a DV270 tape)

Video

Input

VBS, VS (BNC type):
1.0 Vp-p, 75

, unbalanced

Output

VBS (BNC type):
1.0 Vp-p, 75

, unbalanced

S-VIDEO (DIN 4-pin):
Y: 1.0 Vp-p, 75

, sync negative

C: 0.3 Vp-p, 75

, at burst level

Quality mode

SUPER, HIGH, MIDDLE and LOW mode
(selectable) (Field-by-field recording)
HYPER mode
(Frame-by-frame recording with a trigger signal)

Horizontal resolution

More than 500 TV lines
(HYPER and SUPER mode)

Signal-to-noise ratio

More than 48 dB

Built-in Multiplexer

Input

4 inputs (up to 16 inputs with optional boards)

Output

2 outputs

Split screen display

9 patterns

Connectors

Parallel input/output

D-SUB 37-pin (1)

Input:

24 terminals to be freely assigned
(Alarm, Clock set, Series rec, Alarm cancel, etc.)

Output:

8 terminals to be freely assigned

(Auto off, Tape end, Series rec, Rec tally, ect.)

Power output:

+12 V (max 100 mA)

Control S

Stereo mini (1)

Notes: *1 The recorded tape by the HSR-1P cannot be played back on DV equipment.

*2 A DVCAM 184-minute tape can be used with the HSR-1P. It has the same storage capacity as

that of a DV 270-minute tape.

•Hybrid configuration of HDD and DV tape drive
•Four alternative quality modes: Super, High ,Middle and

Low modes

•Excellent picture quality provided by super mode with a

horizontal resolution of more than 500 TV lines (Super
mode)

•Large storage capacity(more than 60 GB) and long

recording time by using DV cassette tape(270-minute
tape) as a storage medium

•High refresh rate for recording of each camera
•High reliability on tape transport mechanism and heads offered

by the hybrid configuration of HDD and DV tape drive.

•Compact body which matches that of a 14-inch monitor
•Compact storage medium which requires less space
•Up 16 camera inputs provided by installing optional

HSRA-11

•Built-in duplex multiplexing capability which allows

recording and monitoring of up to 16 camera inputs
independently.

•A variety of monitoring patterns
•Two monitoring outputs for simultaneous playback on the

first monitor and monitoring on the second monitor

•Five preset recording modes to be flexibly combined

with picture quality mode, tape length, recording time,
number of camera inputs and the recording cycle of
each camera.

•Flexible camera assignment
•RS-232C interface for PC control
•Freely configurable 37-pin parallel port
•Flexibility in alarm mode
•Continuous recording function without breaks even while

changing or rewinding the tape

•Sophisticated security functions
•Water mark
•Intelligent search functions: time/date search, alarm search,

specific user data search and noiseless picture search

•Pre Alarm recording capability for event recording
•Power On recording capability
•Frame recording in hyper mode

Digital Surveillance Recorder

HSR-1P

Specifications

Rear Panel

Advertising