Sony CDP-C5CS - Manual (Page 9)

9 US
Playing CDs
Using the CD display
You can check information about the disc using
the display.
In the stop mode
Press TIME.
The display shows the current disc number, the
total number of tracks, total playing time and
music calendar.
The information also appears when you press
AOPEN/CLOSE to close the disc tray.
The tracks numbered over 20 cannot be
displayed in the music calendar.
Notes on the disc number
indications
• The red circle around a disc number
indicates the disc is ready to be played.
• When all the tracks on a disc have been
played, the semi-circle around the disc
number disappears.
• When a disc compartment is recognized as
empty, the semi-circled disc number
disappears.
During normal playback
While playing a disc, the display shows the
current disc number, track number, playing
time of the track and the music calendar.
The track numbers in the music calendar
disappear after they are played.
Total number of tracks Music calendar
Total playing time Current disc number
continued
1 2 3 4 5
6 7 8 9 10
1 2 3 4 5 DISCS ALL
TRACK DISC MIN SEC
1 10
4 5 2 8
Notes
• If “ ” appears in the display, the disc has
reached the end while you were pressing M. Press
m or turn lAMSL counterclockwise to go
back.
• If you press ANALOG OUT LEVEL +/– on the
remote while recording, the recording level will
change even when it is preset on the tape deck, etc.