Sharp DT-200 - Manual (Page 26)

E-25
Operation Buttons
Adjusting the Picture Aspect Ratio
NORMAL
Output screen image
BORDER STRETCH
DVD
/ VIDEO COMPUTER Image Type
Input Signal
480i
480P
VGA (640x480)
SVGA (800x600)
XGA (1024x768)
540P
NTSC
PAL
SECAM
Letter Box
*
*
Squeezed
4:3 image
16 : 9 aspect ratio
*
720P
1080i
—
*
*
*
—
*
*
: Cutout area on which images cannot be projected.
: Area on which the image is not included in the original signals.
Projects the image fully
on a screen while
maintaining the aspect
ratio. Projects the image on
the screen whose
surrounding areas are
cut out to make a 4:3
screen while maintaining
the aspect ratio. Projects the image on
the screen whose upper
and lower areas are cut
out to make a 16:9
screen while the image
is horizontally enlarged.
* Mode for projecting an image with the original aspect ratio without cutting any portions.
4:3 aspect ratio
Squeezed 16:9
Freeze Function
This function allows you to instantly freeze a moving
image. This is useful when you want to display a still
image from a computer or video, giving you more
time to explain the image to the audience.
You can also use this function to display a still image
from a computer while you make preparations for the
next computer images to be presented.
1 Press FREEZE to freeze the image.
2 Press FREEZE again to return to the moving image.
• The still image is cancelled should any of the following occur
while the picture is frozen.
• Pressing the INPUT button
• Interruption of the video signal
• Pressing the FREEZE button
FREEZE
FREEZE button
END
FREEZE
DT-200(E)#p24_25.p65 02.11.21, 11:40 AM 25