Sharp DT-200 - Manual (Page 42)

E-41
Basic Operation
Automatic Power Shut-off Function
2,3,4
1, 5
On-screen Display
When no input signal is detected for more than 15
minutes, the projector will automatically shut off. The
on-screen message on the left will appear five minutes
before the power is automatically turned off.
Description of Automatic Power Shut-off
1 Press MENU. The “Picture” menu screen appears.
2 Press / to display the “Options” menu screen.
3 Press / to select “Auto Power Off”.
4 Press / to select “ ” or “ ”.
5 To exit the menu screen, press MENU.
• “Auto Power Off” is factory preset to “ ”.
• When the Auto Power Off function is set to “ (On)”, 5
minutes before the power turns off, the message “Power
OFF in X min.” will appear on the screen to indicate the
remaining minutes.
Power automatically shuts off after 15 minutes without
an input signal.
Automatic Power Shut-off disabled.
Description
Selected
item
DT-200(E)#p41_42.p65 02.11.21, 11:42 AM 41