Sony CDP-CX450 - Manual (Page 21)

Playing CDs
21
Playing CDs
Creating Your Own Program
(Program Play)
You can arrange the order of the tracks and/or discs to
create three different programs that are stored
automatically. A program can contain up to 32 “step.”
One “step” may contain a track or a whole disc.
You can make programs using the controls on the
remote or on the player. However, the programming
procedures are different.
Creating a program on the player
1
Press PROGRAM until the desired program
number (PROGRAM 1, 2, or 3) appears in the
display.
If a program is already stored in the selected
program number, the last step of the program
appears in the display. When you want to erase the
whole program, hold down CLEAR until
“CLEAR” appears in the display (see page 22).
2 Turn the JOG dial until the desired disc number
appears in the display.
3 To program a whole disc, skip this step.
Turn the . AMS > dial until the desired
track number appears in the display.
I / 1
CHECK PROGRAM JOG
H
CLEAR
. AMS >
S DISC ALL
NEXT
CD TEXT
1
CD2
GROUP
NO DELAY MULTI
2 3 X-FADE DELETE
CD3
REPEAT SHUFFLE 1
SEC STEP MIN ART. GROUP TRACK HIT ART. 2nd DISC
* D I S C - 2 * * 0 * * *
CD1
PROGRAM 1
S DISC ALL
NEXT
CD TEXT
1
CD2
GROUP
NO DELAY MULTI
2 3 X-FADE DELETE
CD3
REPEAT SHUFFLE 1
SEC STEP MIN ART. GROUP TRACK HIT ART. 2nd DISC
* D I S C - 2 * * 0 * * *
CD1
PROGRAM 1
Track number
4
Push the JOG dial.
5
To program other discs/tracks, do the following:
To program
All tracks of another disc(s)
Other tracks on the same disc
Other tracks on other discs
6 Press H to start Program Play.
To cancel Program Play
Press CONTINUE.
z The programs remain even after Program Play ends
When you Press H in Program Play mode, you can play
the same program again.
z When you press PROGRAM to select Program Play
during Continuous or Shuffle Play
The program is played after the current track.
z The program remains until erased
Even if you replace discs, the programmed disc and track
numbers remain. Therefore, the player will play the new
disc and track numbers. However, the programmed disc
and track numbers that are not found in the player or on
the disc are deleted from the program, and the rest of the
program is played in the programmed order.
z You can select the program number (PROGRAM 1,2,
or 3) by using the remote Z
Press PROGRAM on the remote repeatedly until the
desired program number appears in the display.
Note
If you select Group Play mode (on page 33), Artist Play mode
(on page 36), or Hit List (on page 39), Program Play will be
canceled.
The track
being programmed
S DISC ALL
NEXT
CD TEXT
1
CD2
GROUP
NO DELAY MULTI
2 3 X-FADE DELETE
CD3
REPEAT SHUFFLE 1
SEC STEP MIN ART. GROUP TRACK HIT ART. 2nd DISC
* D I S C - 2 * * 0 * * *
CD1
PROGRAM 1
The disc being
programmed
Repeat Step(s)
2 and 4
3 and 4
2 to 4
Playing order