Hookups, Hooking up the player, Step 1: connecting the video cords – Sony DVP-NS400D User Manual
Page 18: Bc a
18
Hookups
Hooking Up the Player
Follow Steps 1 to 4 to hook up and adjust the settings of the player.
Before you start, turn off the power, check that you have all of the supplied accessories, and insert
the batteries into the remote (page 14).
Notes
•
Plug cords securely to prevent unwanted noise.
•
Refer to the instructions supplied with the components to be connected.
Step 1: Connecting the Video Cords
Connect this player to your TV monitor, projector or, AV amplifier (receiver) using a video cord.
Select one of the patterns A through C, according to the input jack on your TV monitor, projector,
or AV amplifier (receiver).
PCM/DTS/MPEG/
DOLBY DIGITAL
5.1CH OUTPUT
WOOFER
R-AUDIO-L
VIDEO
COAXIAL OPTICAL
L
R
FRONT
REAR CENTER
LINE 1 (RGB)-TV
LINE OUT
S VIDEO OUT
DIGITAL OUT
LINE 2
INPUT
S VIDEO
B
C
A
AUDIO
INPUT
L
R
VIDEO
CD/DVD player
l
: Signal flow
S VIDEO cord
(not supplied)
Audio/video cord
(supplied)
(yellow)
(yellow)
SCART (EURO AV) cord
(not supplied)
TV
TV, projector or AV
amplifier (receiver)
TV, projector or AV
amplifier (receiver)
VCR
connecting
the VCR