Sony DVP-NS400D - Manual (Page 27)

Hook
u
p
s
27
This connection will allow you to enjoy the surround effects of the Pro Logic decoder on your
amplifier (receiver). If you have an AV amplifier (receiver) equipped with a Dolby Digital,
MPEG audio, or DTS decoder, refer to page 23.
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
Pro Logic uses a minimum of 3 speakers (front L and R, and rear (monaural)). The surround
effects are enhanced if 6 speakers (front L and R, centre, rear L and R, and subwoofer) are used.
If your amplifier (receiver) has L and R audio input jacks only, use
. If your amplifier
(receiver) has a digital input jack, use .
xRecommended surround sound effects using this connection with your amplifier (receiver).
•
Dolby Surround (Pro Logic) (page 82)
z For correct speaker setting location, please refer to the operating instructions of the amplifier (receiver).
∗
When connecting 6 speakers, replace the monaural rear speaker with a centre speaker, 2 rear speakers and a
subwoofer.
Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro
Logic) decoder and 3 to 6 speakers
D
D-1
D-2
PCM/DTS/MPEG/
DOLBY DIGITAL
5.1CH OUTPUT LINE 2
WOOFER R-AUDIO-L VIDEO
COAXIAL OPTICAL
L
R
FRONT REAR CENTER
LINE 1 (RGB)-TV
LINE OUT S VIDEO OUT
DIGITAL OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
COAXIAL
DIGITAL OUT
D-2
OPTICAL
D-1
LINE OUT
R-AUDIO-L VIDEO
CD/DVD player
or
Front
(R)
Front
(L)
Rear
(R)
Subwoofer
l : Signal flow
Rear
(L)
Dolby Surround amplifier (receiver)
Centre
Rear *
(mono)
Stereo
audio cord
(not supplied)
[Speakers]
Coaxial digital
cord (not supplied)
(white) (red)
to coaxial or optical digital input
Optical digital cord
(not supplied)
Remove jack cap
before connecting
[Speakers]
or
to audio input
(white)
(red)