Sony DVP-NS400D - Manual (Page 19)

Hook
u
p
s
19
Connect the SCART (EURO AV) cord (not supplied). Be sure to make the connections firmly to
avoid hum and noise. When you connect using the SCART (EURO AV) cord, check that the TV
conforms to S video or RGB signals. Refer to the operating instructions supplied with the TV to
be connected. Also, when you set “LINE” to “S VIDEO” or “RGB” under “CUSTOM SETUP”
in the Setup Display (page 60), use a SCART (EURO AV) cord conforms to each signal.
Connect the yellow plug of the audio/video cord (supplied) to the yellow (video) jacks. You will
enjoy standard quality images.
Use the red and white plugs to connect to the audio input jacks (page 22).
Connect the S VIDEO cord (not supplied). You will enjoy high quality images.
If you are connecting to a VCR
Connect your VCR to the LINE 2 jack on the player. The VCR can record the signal only from
TV.
Notes
•
Do not connect the player to a VCR so that the signals of the player are passed to the TV via the VCR. If you do
so, you may not receive a clear image on the TV screen.
•
If you cannot view the pictures from a VCR through this player which is connected to a TV with RGB component
jacks, set
to t (Audio/Video) on your TV. When you select (RGB), the TV cannot receive the
signal from the VCR.
A If you are connecting to a SCART (EURO AV) input jack
B If you are connecting to a video input jack
C If you are connecting to an S VIDEO input jack
Yellow (Video)
White (L)
Red (R)
Yellow (Video)
White (L)
Red (R)
VCR
CD/DVD player TV
Connect
directly
continued