Sony DVP-NS400D - Manual (Page 77)

Se
tt
ings
a
nd Adjus
tme
nts
77
•
SUBWOOFER
Notes
•
The cut off frequency for the subwoofer is fixed at
120 Hz.
•
If your speakers are too small to reproduce low bass
frequencies, please set all speaker settings to
“SMALL” and utilize a subwoofer for low
frequency sound.
•
Even if there are fewer than 6 speakers connected,
the player distributes the audio signal components to
the front speakers.
x DISTANCE
The default distance setting for the speakers
in relation to the listening position is shown
below.
Be sure to change the value in the Setup
Display when you move the speakers. The
default adjustments are in parentheses.
Notes
•
If each of the front or rear speakers are not placed at
an equal distance from your listening position, set
the distance according to the closest speaker.
•
Do not place the rear speakers farther away from
your listening position than the front speakers.
x BALANCE
You can vary the balance of the left and right
speakers as follows. Be sure to set “TEST
TONE” to “ON” for easy adjustment.
The default adjustments are in parentheses.
NONE If you do not connect a subwoofer,
select this. This activates the Dolby
Digital bass redirection circuitry and
outputs the LFE signals from the front
speakers as long as the front speaker
size is set to “LARGE.”
YES If you connect a subwoofer, select this
to output the LFE (low frequency
effect) channel from the subwoofer.
When you set the other speakers
settings to “SMALL,” the subwoofer
makes up for the missing bass
frequencies of the speakers.
3.6m 3.6m
3.6m
3.0m 3.0m
FRONT
(3.6m) Front speaker distance from the
listening position can be set in
0.2 meter increments from 1 to
15 meters.
CENTER
(3.6m) Centre speaker distance can be
moved up to 0.6 meters
backward from the front
speakers or 1.6 meters forward
closer to the listening position, in
0.2 meter increments.
REAR (3m) Rear speaker distance can be
moved up to 5 meters closer to
your listening position from the
front speaker position, in 0.2
meter increments.
FRONT
(0dB) Adjust the balance between the
front left and right speakers (–
6dB [L] to +6dB [R], 0.5dB
increments).
REAR (0dB) Adjust the balance between the
rear left and right speakers (–
6dB [L] to +6dB [R], 0.5dB
increments).
continued