Sony DVP-NS400D - Manual (Page 31)

Hook
u
p
s
31
4
Press ENTER.
Quick Setup is finished. All connections and setup operations are complete.
If your AV amplifier (receiver) has an MPEG audio decoder, set “MPEG” to “MPEG” (page
74).
1
Press X/x to select the size of the centre speaker.
If no centre speaker is connected, select “NONE.” Refer to page 76 for each selection item.
2
Press ENTER.
The Setup Display for selecting the size of the rear speaker appears.
3
Press X/x to select the size.
If no rear speaker is connected, select “NONE.”
“SIDE” and “REAR” refer to the speakers’ position relative to your listening position.
Refer to page 76 for each selection item.
4
Press ENTER.
The Setup Display for selecting whether or not you have connected a subwoofer appears.
5
Press X/x to select the item.
When 5.1 CH OUTPUT is selected
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
OFF TEST TONE:
FRONT:
CENTER:
SMALL
LARGE
NONE
LARGE
REAR:
SUBWOOFER:
T t th ENTER
NONE
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
OFF TEST TONE:
FRONT:
CENTER: LARGE
REAR:
SUBWOOFER: NONE
LARGE(REAR)
NONE
LARGE
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
OFF TEST TONE:
FRONT:
CENTER:
LARGE
LARGE
REAR:
SUBWOOFER:
To set, press , then .
T
it
ENTER
SETUP DISPLAY
NONE
NONE
YES
LARGE(REAR)
continued