Sony CDX-C910RDS - Manual (Page 23)

23
Actual total number: Sony CDX-C910RDS ( E ,F,G) 3-856-717-11(2)
EN
Adjusting the effect level
1
Press (SOURCE) to select a source (radio,
CD or MD).
2
Press (SOUND) for two seconds.
3
Rotate the dial to select the desired
surround menu.
4
Press (4) (n).
5
Rotate the dial to adjust the level.
You can adjust the level from 0 to 100%.
Increase the level to enjoy more enhanced
effects.
6
Press (SOUND) for two seconds.
SUR
-DEFEAT- SUR EQ
SUR
HALL SUR EQ
Storing the surround
effect onto the CDs
— Digital Signal Processor (DSP) Custom
File (CD changer with custom file function)
Once you have registered the desired surround
menu onto the discs, you can enjoy the same
surround menu every time you play them.
(Only when you have labeled the disc by the
custom file function.)
1
Press (LIST) for two seconds.
2
Press (LIST) until the surround menu
appears.
DSP Custom File mode
3
Rotate the dial to select the desired
surround menu.
4
Press (LIST) for two seconds.
When the effect setting complete, the
display goes back to the normal playback
mode.
Playing the disc with the stored
surround menu
1
Press (SHIFT), then press (3) (P.MODE)
repeatedly until “D.File” appears.
2
Press (4) (n) to select “D.File on.”
After five seconds, the display goes back to
the normal playback mode.
3
Press (SHIFT).
To cancel to play the disc with stored surround
menu, select “D.File off” in step 2 above.
Changing the stored surround
effect
Play the disc whose surround mode you want
to change, and follow the steps of “Storing the
surround effect onto the CDs.”
Erasing the stored surround effect
Select “DEFEAT” in step 3 of “Storing the
surround effect onto the CDs.”
CD1 -DEFEAT-
2 4 11.‚3 SUR EQ
DISC TRACK
CD/MD Changer/DSP
SUR
Effect 8‚% SUR EQ
SUR
Effect 3‚% SUR EQ