Siemens HIPATH 1190 - Manual (Page 12)

Passo a passo
Telephone Reference Information
12
How to use this manual
The steps for programming the system are presented
sequentially in graphic format under the column "Step
by Step" on the left side of each page.
Symbol Explanations:
Lift the handset.
Replace the handset.
Initiate conversation.
, ... Enter numbers, keys, passwords, internal or external
phone numbers, etc.
u or v Press keys to configure telephone settings.
Press this key.
Press the key with the LED turned on.
Press the blinking LED key.
: The display shows the function available at the mo-
ment.
To activate the function indicated press .
> : To browse through available functions
press
< >
,
until the function shows on the display.
Then press :
to confirm your selection .
Wait to hear an audible tone through the handset or
speaker.
An extension is calling.
When activating certain functions and procedures, a
long beeping tone means the activation was success-
ful.
When activating certain functions and procedures,
short beeping tones mean the activation failed.
* 8 8
Service Menu
Speaker
CONSULTATION?
Ring Tone?
<<  >>
oi.book Seite 12 Mittwoch, 16. August 2006 8:41 08