Siemens HIPATH 1190 - Manual (Page 20)

Step by step
Functions used for making calls
20
... Using Automatic Seizure of
an Active External Line
• Internal call
Press the "INTERNAL" key.
Enter an extension number (e.g., 11/101).
• External calls:
Enter the external number you want to call.
Wait for the call to be answered. Initiate conversation.
... Using a Group of External Lines
1
An extension can originate external call or calls to a
Master PABX through a group of external lines.
Enter the number of the appropriate group of external
lines for accessing an external line.
• or to = Group of external lines
Wait for a dial tone.
Enter the external number you want to call.
Wait for the call to be answered. Initiate conversation.
... When a group is busy
If an overflow group was configured when the system
was programmed, the call is carried out using a second
group of external lines.
The second group of external lines takes into account
the extension’s class of service.
INTERNAL
[1] When operating as a Satellite PABX for external calls or for calling
extensions of a Master PABX, select the group of external lines be-
fore selecting the second external access code (0...9 or 00...99).
Or, select the extension number, as appropriate (see Important
Programming Data - Assigning Groups of External Lines to Exten-
sions in the Programming Manual). When a group of external lines
is configured as a Satellite PBX, a false dial tone is not generat-
ed.Overflow Group for External Lines (see Programming Manual.
Programming an external Line - Overflow for a Group of External
Lines
0 9 0 8 9 9 8
oi.book Seite 20 Mittwoch, 16. August 2006 8:41 08