Siemens HIPATH 1190 - Manual (Page 36)

Step by step
Functions used for making calls
36
Hotline
1
The Hotline feature allows an extension to automatically
generate a call to a pre-programmed number in the Sys-
tem Speed Dialing as soon as the handset is lifted.
Lift the handset.
or
Press this key. The LED turns on.
Wait for the call to be answered. Initiate conversation.
Warmline
2
Warmline is the length of time the extension should
wait to call the first number configured as a Hotline. As-
suming the timeout is 9 seconds, the call will be made
9 seconds after the handset is lifted. However, if during
the 9 second time interval a key is pressed on the
phone keypad, the call to the Hotline will be canceled.
Each extension can have a different timeout for activat-
ing a Hotline. This timeout may vary from 0 to 9 sec-
onds.
Lift the handset.
or
Press this key. The LED turns on.
Wait for the call to be answered. Initiate conversation.
During a conversation using a headset (see
Headset feature)
, Urgent Calls are signaled, al-
though they cannot be answered until the call
has ended.
Once the call has ended you must press the
HEADSET ON key or the electronic hook control
to answer an Urgent Call. The call will not be an-
swered automatically.
[1] Extensions configured to use the Hotline feature cannot dial any
other internal or external numbers. However, they are able to re-
ceive calls as usual (see Programming an Extension - Hotline in the
Programming Manual).
Speaker
[2] Extensions configured to use the Warmline function are able to dial
all other internal or external numbers, as well as receive calls as
usual (see Programming an Extension - Warmline in the Program-
ming Manual).
Speaker
oi.book Seite 36 Mittwoch, 16. August 2006 8:41 08