Siemens HIPATH 1190 - Manual (Page 81)

Miscellaneous Functions
81
Step by step
Relay
1
The relay on the HiPath 1120 music module is used to
control all peripheral equipment, such as the Door
Opener, etc.
Press this key.
> : Select and press to confirm.
or
> :
or
or Enter the code for deactivating the relay.
Turkey 53951509
Latvia 23730903
Lithuania 54369901
Italy 70129594
Australia 99168546
United Kingdom 54721445
France 68141859
korea 1 99251480
[1] The Numbering Plan suffers the following changes:
a) Access to the group of external lines (
Æ
page 20) is done with
digit "9" instead of "0";
b) Calling an operator terminal (
Æ
page 37) is done with digit "0"
instead of "9";
c) Group call pickup (
Æ
page 53) is done with sequence "*0" inste-
ad of "*57";
d) Recovery of a parked call (
Æ
page 50) is done with sequence
"*57" instead of "*0";
[1] Activate (contacts closed) or Deactivate (contacts open) the relay
immediately or after a specified time (see Relay and Sensors in
Programming Manual, HiPath 1120).
Country Code
Service Menu
*90= CONTROL RELAY ON?
*90= CONTROL RELAY OFF?
0 * 9 0 # 9
oi.book Seite 81 Mittwoch, 16. August 2006 8:41 08