SATO M10e User Manual
Page 31
Advertising
Section 3. Configuration
SATO M10e
PN 9001101 Rev. A
Page 3-9
DISPLAY
This potentiometer is used to adjust the contrast of the LCD display for optimum viewing
under various lighting conditions.
The PRINT potentiometer is used to adjust the amount of heat (i.e., power) applied to the head
for printing. It provides a continuous range of adjustment. Maximum print darkness is
obtained by turning the potentiometer all the way clockwise and a maximum counterclockwise
setting will give the lightest print.
NOTE: The PRINT potentiometer adjustment will affect the darkness in all of the
command code speed and darkness ranges.
Advertising