Sony 3-289-450-44(1) - Manual (Page 37)

37 GB
Ge
tting Star
te
d
9: Adjusting the speaker
levels and balance
(TEST TONE)
You can adjust the speaker levels and balance
while listening to the test tone from your
listening position.
1
Press AMP MENU.
2
Press V/v repeatedly to select
“LEVEL”, then press or b.
3
Press V/v repeatedly to select
“TEST TONE” then press .
4
Press V/v to select the test tone
type and the speaker you want
to adjust.
You can select “FIX” or “AUTO”. For details,
see “TEST TONE (Test tone)” (page 47).
Tips
• To adjust the level of all speakers at the same
time, press MASTER VOL +/–. You can also
use MASTER VOLUME on the receiver.
• The adjusted value are shown on the display
during adjustment.
5
Repeat steps 1 to 4 to select
“OFF”.
You can also press any input buttons.
The test tone turns off.
When a test tone is not output
from the speakers
• The speaker cords may not be connected
securely.
• The speaker cords may have the short-circuit
problem.
When a test tone is output from
a different speaker than the
speaker indicator showed in the
front panel display.
The speaker pattern to the connected speaker
is not set up correctly. Make sure the speaker
connection and the speaker pattern match.
1 2 3
4 5 6
7 8 9
-/-- 0/10 ENT/MEM
2CH/
A.DIRECT A.F.D. MOVIE MUSIC
CLEAR />10
SHIFT TV
TUNING – TUNING +
DISC SKIP D.TUNING
AUTO CAL
.
m M
>
X x
MUTING
VIDEO 1 VIDEO 2 BD
SAT TV
DMPORT
SA-CD/
CD TUNER
TV VOL
MASTER VOL
TV CH
PRESET
< <
MENU
BD/DVD
RETURN/
EXIT
OPTIONS
TOOLS
HOME
DISPLAY
AMP
MENU
O
DVD
INPUT
MODE SLEEP
NIGHT
MODE
AMP
1
MASTER
VOL +/–
2-5
Input
buttons