SMC Networks SMC EZ 10/100/1000 SMCGS8P-Smart - Manual (Page 114)

C
ONFIGURING THE
S
WITCH
2-82
Adding Interfaces Based on Static Membership
Use the VLAN Static Membership by Port menu to assign VLAN
groups to the selected interface add an interface to the selected
VLAN as a tagged member.
Command Attributes
• Interface – Port or trunk identifier.
• Member – VLANs for which the selected interface is a tagged
member.
• Non-Member – VLANs for which the selected interface is not
a tagged member.
Web – Open VLAN, VLAN Static Membership. Select an interface
from the scroll-down box (Port or Trunk). Click Query to display
VLAN membership information for the interface. Select a VLAN ID,
and then click Add to add the interface as a tagged member, or
click Remove to remove the interface. After configuring VLAN
membership for each interface, click Apply.
b_mgmt.book Page 82 Tuesday, July 8, 2003 5:24 PM