SMC Networks SMC EZ 10/100/1000 SMCGS8P-Smart - Manual (Page 340)

C
OMMAND
L
INE
I
NTERFACE
3-172
Example
Related Commands
map ip precedence (Global Configuration) (3-166)
map ip precedence (Interface Configuration) (3-167)
show map ip dscp
Use this command to show the IP DSCP priority map.
Syntax
show map ip dscp [interface]
interface
• ethernet unit/port
- unit - This is device 1.
- port - Port number.
• port-channel channel-id (Range: 1-6)
Default Setting
None
Command Mode
Privileged Exec
Console#show map ip precedence ethernet 1/5
Precedence mapping status: disabled
Port Precedence COS
--------- ---------- ---
Eth 1/ 5 0 0
Eth 1/ 5 1 1
Eth 1/ 5 2 2
Eth 1/ 5 3 3
Eth 1/ 5 4 4
Eth 1/ 5 5 5
Eth 1/ 5 6 6
Eth 1/ 5 7 7
Console#
b_mgmt.book Page 172 Tuesday, July 8, 2003 5:24 PM