SMC Networks SMC EZ 10/100/1000 SMCGS8P-Smart - Manual (Page 57)

S
ECURITY
2-25
Web – Click System, SSH Settings. Select Enabled for the SSH
Server Status, specify the authentication timeout and number of
retries, then click Apply.
CLI Commands
CLI – Enter the following commands to configure the SSH service.
Console(config)#ip ssh server 3-38
Console(config)#ip ssh timeout 100 3-37
Console(config)#ip ssh authentication-retries 5 3-37
Console(config)#
Console#show ip ssh
3-40
Information of secure shell
SSH status: enable
SSH authentication timeout: 100
SSH authentication retries: 5
Console#show ssh
3-40
Information of secure shell
Session Username Version Encrypt method Negotiation state
------- -------- ------- -------------- -----------------
0 admin 1.5 cipher-3des session-started
Console#disconnect ssh 0
3-39
Console#
b_mgmt.book Page 25 Tuesday, July 8, 2003 5:24 PM