SMC Networks SMC EZ 10/100/1000 SMCGS8P-Smart - Manual (Page 349)

A-1
A
PPENDIX
A
T
ROUBLESHOOTING
Troubleshooting Chart
Troubleshooting Chart
Symptom Action
Cannot connect
using Telnet, Web
browser, or SNMP
software • Be sure to have configured the agent with a valid IP
address, subnet mask and default gateway.
• Be sure that your management station has
management VLAN access to the switch (default is
VLAN 1).
• Check that you have a valid network connection to
the switch and that the port you are using has not
been disabled.
• Check network cabling between the management
station and the switch.
• If you cannot connect using Telnet, you may have
exceeded the maximum number of concurrent
Telnet sessions permitted. Try connecting again at a
later time.
b_mgmt.book Page 1 Tuesday, July 8, 2003 5:24 PM