Directing console output – Sun Microsystems X6450 User Manual

Page 28

Advertising
background image

18

Sun Blade X6450 Server Module Installation Guide • May 2009

■

For details about installing a supported Windows operating system, refer to the
Sun Blade X6450 Server Module Windows Operating System Installation Guide (820-
3537).

■

For additional OS considerations specific to your server module, also refer to the
Sun Blade X6450 Server Module Product Notes (820-3538).

Directing Console Output

The server module always sends console I/O to the VGA port.

By default, it sends service processor I/O to the serial port.

The External Serial Port control in the BIOS allows you to modify the behavior of the
serial port connection.

■

If you set it to BMC (the default), the server module sends ILOM output to the
serial port.

■

If you set it to System, the server module sends console output to the serial port.

These settings only affect the connections on the dongle cable.

Note –

You can also view console output using the service processor, as described in

“Accessing the System Console” on page 29

.

Advertising