Sun Microsystems X6450 - Manual (Page 43)

Chapter 2 Installing and Configuring the Server Module 33
Caution – To avoid physical damage to the dongle cable and the connector,
disconnect the dongle when it is not being used.
TABLE 2-1 Dongle Cable Connectors
1 DB9 serial console to server module service processor.
Note: this connector is not present on a three-connector dongle.
2 VGA video connector.
3 RJ-45 connector.
- On a three-connector dongle, this connector provides serial access to the service processor.
- On a four-connector dongle, this connector is unused.
4 Dual USB connectors.