Sharp MD-MT877 - Manual (Page 14)

14
Using with the AC Adaptor
1
Place the portable MD to the battery
charger.
2
Move the Charge/Operation switch to
the operation mode.
3
Plug the AC adaptor.
Caution:
● If the Charge/Operation switch is not set to the opera-
tion mode, no operation is possible.
(See “How to use the Charge/Operation switch”, page 11)
● When the unit is not in use for extended periods, re-
move the AC adaptor from the AC outlet.
● Insert the plugs firmly.
Note:
When power failure occurs while playing back using the
AC adaptor, disconnect the adaptor from the AC outlet.
Otherwise, playback may start automatically when the
power returns.
To the DC IN
5V jack
AC 120V,
60Hz
Operation mode
Power Source
–
Using with the
AC
Adaptor
–