Sony ICD VGN-UX200 - Manual (Page 119)

119 n N
Customizing Your VAIO Computer
Using Standby Mode
Standby mode turns off the LCD screen and places the hard disk and the CPU into a low power consumption mode. The
umber power light flashes in this mode.
To activate Standby mode
1 Click Start and then Turn Off Computer.
2 Click Stand By.
To return to Normal mode
Press any key.
!
If you slide up (in the direction of f on the switch) and hold the power switch for more than four seconds, your computer will turn off automatically.
You will lose any unsaved data.
✍
Your computer comes out of Standby mode quicker than out of Hibernate mode.
If the power switch is in the HOLD position, you can slide it up (in the direction of f on the switch) to return to Normal mode.
Standby mode uses more power than Hibernate mode.
!
If the battery runs down while your computer is in Standby mode, the computer will automatically enter Hibernate mode.
If the computer is not used for 25 minutes, it will enter Standby mode. To avoid this, you can change the Standby mode
settings.