Sony ICD VGN-UX200 - Manual (Page 78)

78 n N
Using Peripheral Devices
Connecting a Projector
You need the supplied port replicator or display/LAN adapter to connect a projector (for example, the Sony LCD projector) to
your computer.
To connect a projector
1 Connect the power cord (1) of your projector into an AC outlet.
2 Plug an RGB signal cable (2) (not supplied) into the monitor (VGA) port (3) a on the port replicator or on the display/LAN
adapter.
3 Plug an audio cable (4) (not supplied) into the headphones jack (5) i .
4 Plug the RGB signal cable and the audio cable into the jack and port on the projector (6).