ScyTek Electronics PRECISION PRO 5500 - Manual (Page 36)

Precision Pro - Page 32
Jumper Selection
Carefully separate the top and bottom halves of the main unit case. Once the cover is removed, the parking
light polarity jumper will be visible next to the parking light relay. Set the jumper for the correct polarity
output as described below, then reassemble the main unit case.
Parking Light Output. Selects the polarity (+/-) for the output of the on-board Parking Light relay.
Left Pin + Center Pin = positive ( Default setting is ( + )
Right Pin + Center Pin = negative
Parking Light 2
Parking Light 1
IGN3/AUX3/REARM
GLOW PLUG
All JUMPER DEFAULTS +