ScyTek Electronics PRECISION PRO 5500 - Manual (Page 41)

Precision Pro - Page 37
26. Ignition 2 Relay Program. Selects one of three operating modes for the Ignition 2 relay output:
Ignition 2, Accessory 2, or Starter 2.
27. Wait to Start Polarity input. Select positive or negative wait to start input.
28. External Sensor Mode. Select sensor-2 input as an additional sensor input, or an external start
trigger.
29. Parking Light-2 Output Mode (+)10A. Select this 10A positive output as an additional parking
light, Trunk Release, or a Third Starter Ouput. .
30. Turbo Timer. When enabled, if the emergency brake has been applied Ignition power will be kept On
for a predetermined time (2 minutes Factory Default) from the application of the emergency brake.
31. Extended Parking Lights. When Enabled, upon Disarming Parking lights will turn On for 30
seconds
32. Warn-Away Pager Report. When Enabled, Warn-Away report will be sent to the pager. If Disabled
no Warn-Away report will be sent to the pager.
33. Anti-Carjack Type. Selects one of three modes for Anti-Carjacking: Active, Passive, or Full-Time.
Manual. When selected, pressing Button 4 will automatically engage the Anti-Carjacking feature.
Passive. When selected, the Anti-Carjacking feature will activate whenever a door is opened while the
ignition is on.
Full-Time. When selected, the Anti-Carjacking feature will automatically activate each time the ignition is
turned on.
34. Anti-Carjack Mode. Enables Anti-Carjacking protection.