Siemens OPTIPOINT HIPATH 2000 - Manual (Page 125)

Fixing Problems
125
Step by Step
Possible cause 1:
If "Delete other layer" appears on the menu:
you tried to program a function or internal station num-
ber with LED on a key that is already programmed on
the second layer (for example, external station number).
Possible response:
Confirm "Delete other layer" to program the station
number/function.
Possible cause 2:
If Delete LED support" appears on the menu:
you tried to program a station number without LED or
an external station number on a key that is already pro-
grammed with an internal station number with LED.
Possible response:
Confirm "Delete LED support" to save the station num-
ber. The internal station number already programmed
remains on the other layer without LED display.
Contacts for Resolving Problems
if you encounter a problem that lasts longer than five
minutes, contact your service personnel.
Key affects other layer