Siemens OPTIPOINT HIPATH 2000 User Manual
Page 36
Step by Step
Making Calls – Convenience Functions
36
Answering Calls from the
Entrance Telephone and Opening the Door
If an entrance telephone has been programmed, you
can use your telephone to speak to someone at the
entrance telephone and to activate a door opener.
If you have the proper authorization (contact your ser-
vice personnel), you can activate the door opener, en-
abling visitors to open the door themselves by entering
a 5-digit code (using a DTMF transmitter or installed
keypad).
Speaking to visitors via the entrance telephone:
Precondition: Your telephone rings.
n
Lift the handset within thirty seconds. You are connect-
ed to the entrance telephone immediately.
or
n
Lift the handset after more than thirty seconds.
o
Dial the entrance telephone number.
Opening the door from your telephone during a call
from the entrance telephone:
:
Confirm.
Opening the door from your telephone without
calling the entrance telephone:
Press the key. The LED lights up.
>
:
Select and confirm.
or
qje
Enter the code.
o
Dial the entrance telephone number.
Open door?
Program/Service
*
61=Open door?
Special features must be taken into consider-
ation if your telephone operates with
HiPath 5000 (system networking via PC net-
work)