Siemens OPTIPOINT HIPATH 2000 - Manual (Page 28)

Step by Step
Making Calls – Basic Functions
28
Saving Repertory Dialing Numbers on
a Key
You can save frequently-dialed station numbers on pro-
grammable keys that are unassigned by default.
External and internal station numbers, as well as func-
tions/procedures (comprising several operating steps)
can be stored on these keys
Æ Page 63.
In addition, the keys can be programmed on two sepa-
rate levels if you have configured a key as the "switch-
ing" key (Shift key
Æ Page 63).
Depending on the key assignment and programming of
your HiPath system ("Extended Key Functionality"; refer
to relevant service personnel), dual-level key assign-
ment permits several assignment combinations.
Corresponding displays guide you through this process
Æ Page 124.
If you save internal station numbers, you can choose
whether to save an LED display for the key (=Save with
LED) or not (=Save without LED).
The LED display indicates the various states
(
Æ Page 65, Æ Page 107).
Press the key. The LED lights up.
> :
Select and confirm.
or
qme
Enter the code.
Press the key. If the key is already in use, its assignment
appears on the screen.
If applicable
> :
Make a selection and confirm to save the station num-
ber on the second level.
or
u
:
:
Confirm.
:
Confirm.
o
Enter the station number.
Program/Service
* 91=Prog. feature key?
+=Next layer?
US: Change key?
UK: Change feature?
Repdial key?