Sony 2-680-009-12 (1) - Manual (Page 11)

11 GB
G
e
tting Star
te
d
a)
The number 5, MASTER VOL +, TV VOL +, and
H buttons have tactile dots. Use the tactile dots as
references when operating the receiver.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
Name Function
R Control
buttons
After pressing AMP MENU
(D), DVD MENU (J), or
MENU (N), press the control
button
V, v, B or b to select
the settings. When you press
DVD MENU or MENU, press
the control button to enter the
selection.
S DISPLAY
Press to
– select information displayed
on the receiver’s display (for
TUNER input only).
– select information displayed
on the TV screen of the
VCR, satellite tuner, CD
player, DVD player, or MD
deck.
T -/--
Press -/-- and TV (P) at the
same time to select the
channel entry mode, either
one or two digits of the TV.
>10/
x
Press to select
– track numbers over 10 of the
VCR, satellite tuner, CD
player or MD deck.
– channel numbers of the
Digital CATV terminal.
CLEAR Press to
– clear a mistake when you
press the incorrect numeric
button.
– return to continuous
playback, etc. of the satellite
tuner or DVD player.
U Numeric
buttons
(number 5
a)
)
Press to
– preset/tune to preset
stations.
– select track numbers of the
CD player, DVD player or
MD deck. Press 0/10 to
select track number 10.
– select channel numbers of
the VCR or satellite tuner.
Press the numeric buttons and
TV (P) at the same time to
select the TV channels.
V 2CH Press to select 2CH STEREO
mode.
W A.F.D.
Press to select A.F.D. mode.
X AUTO CAL
Press to activate the Auto
Calibration function.
Name Function
Y TV/VIDEO
Press TV/VIDEO and TV
(P) at the same time to select
the input signal (TV input or
video input).
SLEEP Press to activate the Sleep
Timer function and the
duration which the receiver
turns off automatically.