Sony 2-680-009-12 (1) - Manual (Page 62)

62 GB
1)
Measured under the following conditions:
2)
Reference power output for front, center and
surround. Depending on the sound field settings
and the source, there may be no sound output.
3)
Measured under the following conditions:
Frequency response
Analog 10 Hz – 70 kHz
+0.5/–2 dB (with sound
field and tone bypassed)
Inputs
Analog Sensitivity: 800 mV/
50 kohms
S/N
4)
: 96 dB
(A, 800 mV
5)
)
Digital (Coaxial) Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
Digital ( Optical ) S/N: 100 dB
(A, 20 kHz LPF)
Outputs (Analog)
AUDIO OUT Voltage: 800 mV/10 kohms
SUB WOOFER Voltage: 2 V/1 kohm
Tone
Gain levels ±6 dB, 1 dB step
4)
INPUT SHORT (with sound field and tone
bypassed).
5)
Weighted network, input level.
FM tuner section
Tuning range 87.5 - 108.0 MHz
Intermediate frequency
10.7 MHz
Useable sensitivity 11.2 dBf, 1 µV/75 ohms
S/N
Mono/Stereo 76 dB/70 dB
Harmonic distortion at 1 kHz
Mono/Stereo 0.3%/0.5%
Separation 45 dB at 1 kHz
Frequency response 30 Hz – 15 kHz,
+0.5/–2 dB
AM tuner section
Tuning range
Intermediate frequency
450 kHz
Usable sensitivity 50 dB µ/m
Video section
Inputs/Outputs
Video: 1 Vp-p/75 ohms
COMPONENT VIDEO:
Y: 1 Vp-p/75 ohms
P
B
/C
B
/B-Y: 0.7 Vp-p/
75 ohms
P
R
/C
R
/R-Y: 0.7 Vp-p/
75 ohms
80 MHz HD Pass Through
Area code Power requirements
CEL, CEK, KR, TH6 230 V AC, 50 Hz
AU 240 V AC, 50 Hz
TW 110 V AC, 60 Hz
Area code Power requirements
KR, TH6 220 V AC, 50 Hz
Area code Tuning scale
10 kHz step 9 kHz step
CEL, CEK, AU,
TW, KR, TH6
– 531 –
1,602 kHz