Sony 2-680-009-12 (1) - Manual (Page 28)

28 GB
4
Press the control button or
control button
b to enter the
parameter.
You can also use ENTER or i on the
receiver.
5
Press control button V/v
repeatedly to select “T. TONE
Y”.
You can also use U or u on the receiver.
The test tone is output from each speaker
in sequence as follows:
Front left
t Center t Front right t
Surround right t Surround left t
Sub woofer
6
Adjust the speaker levels and
balance using the LEVEL menu
so that the level of the test tone
sounds the same from each
speaker.
For details, see “Adjusting the level
(LEVEL menu)” (page 35).
Tips
• To adjust the level of all speakers at the same
time, press MASTER VOL +/–. You can also
use MASTER VOLUME on the receiver.
• The adjusted value are shown on the display
during adjustment.
7
Repeat steps 1 to 5 to select
“T. TONE N”.
The test tone turns off.
Selecting a component
1
Press the input button to select
a component.
The selected input appears on the display.
2
Turn on the component and
start playback.
Playback
Selected input
[Display] Components that can
be played back
VIDEO 1 or
VIDEO 2
[VIDEO 1 or
VIDEO 2]
VCR, etc., connected to
the VIDEO 1 or VIDEO 2
jack
DVD
[DVD]
DVD player, etc.,
connected to DVD jack
SA-CD/CD
[SA-CD/CD]
Super Audio CD/CD
player, etc., connected to
the SA-CD/CD jack
TUNER
[FM or AM band]
Built-in radio tuner
1 2 3
4 6
7 8
0/10 ENTER
9
SYSTEM STANDBY
VIDEO 1 VIDEO 2 DVD SA-CD/CD
2CH A.F.D.
RETURN/EXIT
TV CH –
PRESET –
TV CH +
PRESET + REPLAY ADVANCE
MENU
MOVIE MUSIC
MEMORY DVD MENU
CLEAR
TOOLS DISPLAY MUTING
TV VOL
MASTER VOL
FM MODE
D.TUNING
D.SKIP
DUAL MONO
TUNER AMP MENU
>10/
-
F
G g
f
. < < >
5
1
3
MUTING