Sony 2-680-009-12 (1) - Manual (Page 48)

48 GB
Enter the frequency of a station directly by
using the numeric buttons.
1
Press TUNER repeatedly to
select the FM or AM band.
You can also use FM or AM on the
receiver.
2
Press D.TUNING.
3
Press the numeric buttons to
enter the frequency.
Example 1: FM 102.50 MHz
Select 1
b 0 b 2 b 5 b 0
Example 2: AM 1,350 kHz
Select 1
b 3 b 5 b 0
If you have tuned in an AM station, adjust
the direction of the AM loop antenna for
optimum reception.
4
Press ENTER.
If you cannot tune in a station
Make sure you have entered the right
frequency. If not, repeat steps 2 to 4. If you still
cannot tune in a station, the frequency is not
used in your area.
Storing FM stations
automatically
(AUTOBETICAL)
(Models of area code CEL, CEK
only)
This function lets you store up to 30 FM and
FM RDS stations in alphabetical order without
redundancy. Additionally, it only stores the
stations with the clearest signals.
If you want to store FM or AM stations one by
one, see “Presetting radio stations” (page 49).
Be sure to use the buttons on the receiver for
this operation.
1
Press ?/1 to turn off the
receiver.
Direct tuning
1 2 3
4 6
7 8
0/10 ENTER
9
VIDEO 1 VIDEO 2 DVD SA-CD/CD
2CH A.F.D. MOVIE MUSIC
MEMORY DVD MENU
CLEAR
FM MODE
D.TUNING
D.SKIP
DUAL MONO
TUNER AMP MENU
>10/
-
5
1
2
4
3
VIDEO 1 VIDEO 2 DVD SA-CD/CD FM AM
AUTO CAL MIC
PHONES
MEMORY
FM MODE TUNING +
PRESET TUNING
AMP MENU ENTER MASTER
VOLUME
INPUT MODE
+
DISPLAY DIMMER 2CH A.F.D. MOVIE MUSIC
?/1
1,2
2