Sharp DX-B350P - Manual (Page 12)

2-2 Installation Manual
Preparing a Location for the Printer
Basic Installation
• Do not place the printer in a location with poor ventilation, or high level of dust,
otherwise a fire hazard or electric shock may result.
• Do not place the printer near heaters or similar objects, otherwise a fire hazard may result.
• Never block the ventilation openings of the printer, otherwise the internal temperature
will build up and cause a fire hazard.
• Do not place the printer near alcohol, benzine, or other volatile and flammable materials,
or a fire hazard may result.
Space Requirements
A certain amount of space is required for proper operation of the printer and also for performing
printer maintenance and replacing consumables. Use the following figures to plan for
appropriate clearances when determining a location for your printer.
NOTE: Be sure to leave ample space between the ventilation openings on the printer and the nearest wall or
other surface, otherwise overheating may occur leading to a fire hazard. For easy operation,
maintenance and replacing of consumables, you should also leave the clearances shown below
around the printer. Installation of the printer should be carried out by qualified service personnel.
255 mm
300 mm
200 mm
402 mm
200 mm (7-7/8 in)
402 mm (15-53/64) in)
255 mm
(10-3/64in)
300 mm
(11-52/64in)