Sharp DX-B350P - Manual (Page 17)

Installation Manual 2-7
Installation Procedure
Basic Installation
6. Fan the paper and then load the
paper with the side to be printed
facing up and with all 4 corners
aligned. Make sure that the right
width guide is correctly aligned
with the paper size. Do not place
paper over the right width guide.
If the paper is larger than A4 or letter, go to
step 7. If not, skip to step 8.
7. Slide the right and left lock tabs in
the paper tray outwards to unlock
them. Hold the grip of the paper
tray and pull its extendable part to
the front until it touches the
desired paper size.
NOTE: Do not load paper exceeding the maximum fill line or the maximum capacity allowed.
Align the right width guide with the paper width correctly. If the right width guide is
not in place, the paper will not be properly fed and may cause a paper jam.
8. Replace the lid of the paper tray.
9. Firmly seat the tray in the printer.