Sharp DX-B350P - Manual (Page 20)

2-10 Installation Manual
Selecting a Display Language
Basic Installation
Selecting a Display Language
The default language for all LCD display messages, the Configuration Summary, and the Test
Page is English. You can change to one of several languages. Navigate through the System
Menu to select the desired language:
NOTE: The language that you select will be reflected on all LCD display messages, and also the content of
the Configuration Summary.
Printing a Configuration Summary
Your printer can print a Configuration Summary that lists the currently selected status of menu
options, media selections in trays, options installed and other relevant information about your
printer. To print a Configuration Summary, press the INFO button on the Operator Panel.
Setting an IP Address Manually
This action is only needed if you must set an IP address manually. If you receive an IP address
from a DHCP source, then you do not need this action. DHCP is On by default. You must turn
DHCP Off by navigating through the Interface and Network Setup Menus in the Operator
Panel.
Using the Embedded Web Site
The printer has an embedded web site that can be used to set many configuration items and
observe the status of the printer. If the printer is connected to a network, point your browser to
the printer's IP address to use this to configure the printer. Consult the User’s Guide located on
the CD-ROM for further help.