Sharp DX-B350P - Manual (Page 19)

Installation Manual 2-9
Using the Operator Panel
Basic Installation
Turning the Printer On
NOTE: The printer motors run for 2 or 3 minutes when you first turn the power on.
The printer displays a series of messages and then displays READY when it is available for use.
NOTE: While turned on, the printer will go into the standby state if it remains idle for a period of time.
When you have finished using the printer for the day or you do not intend to use it for a long
period of time, switch off the power.
Using the Operator Panel
To configure the printer, press the MENU button and use the NEXT, RETURN and
PREVIOUS buttons to navigate through the Operator Panel options and the SELECT button
to choose the option. You can use the CANCEL button to exit any current selection.
1. Press the power switch to the <I>
position to turn the power on.
INFO
CANCEL
START/STOP FAULT ACTIVE
SELECT
MENU STATUS
NEXT
RETURN
PREVIOUS
LCD Display