Amplifier operation, Selecting the component – Sony STR-DE697 User Manual
Page 22
masterpage:Left
lename[E:\SEM_Janet\Data_STR-
DE697_revised\J9040016_4252272312DE697GB\4252272312\GB04BSC_STR-DE697-
CEL.fm]
22
GB
model name1[STR-DE697]
[4-252-272-31(2)]
1
Press input buttons to select the input.
The selected input appears in the display.
2
Turn on the component and start
playback.
Note
If you select the VCR or DVD player, set the
TV’s video input to match the component you
selected.
3
Turn MASTER VOLUME –/+ to adjust
the volume.
Note
To avoid damaging your speakers, make sure that
you turn down the volume before you turn off the
receiver.
To mute the sound
Press MUTING on the remote.
The muting function will be canceled when you
do the following.
• Press MUTING on the remote again.
• Turn the power off.
• Increase the volume.
To use the headphones
Connect the headphones to the PHONES jack.
• When the headphones are connected, speaker
output is automatically canceled and “SP A”
and “SP B” do not light up in the display.
• When the headphones are connected, you can
select only the following sound fields
(page 32).
– HP 2CH (HEADPHONE 2CH)
– HP MULTI (HEADPHONE MULTI)
– HP THEA (HEADPHONE THEATER)
Amplifier Operation
Selecting the component
To select the
Press
VCR
VIDEO 1 or
VIDEO 2
Satellite tuner
VIDEO 2
Camcorder or video game VIDEO 3
DVD player
DVD
MD or tape deck
MD/TAPE
Super Audio CD or
CD player
SA-CD/CD
Built-in tuner (FM/AM)
TUNER FM/AM
An audio component
AUX
GB01COV_STR-DE697-CEL.book Page 22 Friday, April 2, 2004 12:21 PM