Sony STR-DE697 - Manual (Page 38)

masterpage:Left
lename[E:\SEM_Janet\Data_STR-
DE697_revised\J9040016_4252272312DE697GB\4252272312\GB06ADV_STR-DE697-
CEL.fm]
38 GB
model name1[STR-DE697]
[4-252-272-31(2)]
x SB XXXX
(Surround back decoding mode)
You can use the CUSTOMIZE menu to set the
surround back decoding mode (page 33).
For details on each decoding mode, see page 34.
• AUTO
• MTRX
• OFF
Note
This parameter is valid only in the A.F.D. mode
(page 30).
x DEC. XXXX
(Digital audio input decoding priority)
Lets you specify the input mode for the digital signal
input to the DIGITAL IN jacks.
The initial setting is “DEC. AUTO” for VIDEO 2 and
“DEC. PCM” for DVD, MD/TAPE and SA-CD/CD.
• AUTO
Automatically switches the input mode between
DTS, Dolby Digital, or PCM.
• PCM
PCM signals are given priority (to prevent the
interruption when playback starts). Even when other
signals are input, the sound is output. However, this
receiver cannot decode DTS-CD when set to “DEC.
PCM”.
Note
When set to “DEC. AUTO” and the sound from the
digital audio jacks (for CD, etc.) is interrupted when
playback starts, set to “DEC. PCM”.
x DUAL XXX
(Digital broadcast language selection)
Lets you select the language you want to listen to
during digital broadcast. This feature only functions
for Dolby Digital sources.
• M/S (Main/Sub)
Sound of the main language will be output through
the front left speaker and sound of the sub language
will be output through the front right speaker
simultaneously.
• M (Main)
Sound of the main language will be output.
• S (Sub)
Sound of the sub language will be output.
• M+S (Main + Sub)
Mixed sound of both the main and sub languages will
be output.
x P.SAVE. XXX
(CONTROL A1II power save function)
(Except for models of area code CEL,
CEK)
• ON
Lets you save the power consumption of the receiver
during standby mode when the power save function
is activated.
• OFF
Lets you turn on the system automatically when the
component connected via monaural mini-plug cords
(page 42) is turned on.
x NAME IN
(Naming preset stations and inputs)
Lets you set the name of preset stations and inputs
selected with input buttons. For details, see “Naming
preset stations and inputs” on page 39.
GB01COV_STR-DE697-CEL.book Page 38 Friday, April 2, 2004 12:21 PM