Sharp DT-300 - Manual (Page 48)

-47
Adjustments and Settings
Settings of all items in “Picture” can be
stored for the respective input modes.
The stored settings can be selected in
any input modes.
Besides “Memory 1” to “Memory 5”,
other settings on the “Picture” menu
can be stored for each input mode.
The settings stored in “Memory OFF”
cannot be applied when another input
mode is selected.
Memory
1-5
Memory
OFF
Selected Item Description
On-screen Display
PICTURE SETTING button
PICTURE SETTING
button
Picture Setting Func-
tion
This function stores all items set in “Picture”.
Five settings can be stored separately in
“Memory 1” to “Memory 5”. Each stored set-
ting is reassigned to each input mode (INPUT
1 to INPUT 4 and DIGITAL).
Even when the input mode or signal is
changed, you can easily select optimal set-
tings from the stored settings.
■Storing the Adjustment Val-
ues for Each Memory Num-
ber
Select “Picture Setting” on the “Pic-
ture” menu and the memory location
where you want to store the settings.
Then adjust the setting items on the
“Picture” menu.
➝For operating the menu screen, see
pages 38 to 41.
■Applying the Stored Settings
If you want to apply the stored settings
on the “Picture” menu, select “Picture
Setting” on the “Picture” menu and the
memory location where you have
stored the settings.
Note
• This function can be operated using the
on the projector or on the remote
control, as well as the OSD menu screen.
Each time
or is pressed, the
memory number changes as shown be-
low.
Memory 1 Memory 2 Memory 3
Memory OFF Memory 5 Memory 4
03.10.29, 2:44 PM Page 47