Sony CMT-SE1 - Manual (Page 11)

Soun
d Adju
stme
nt/Ti
m
er
11 GB
You can adjust the bass and treble to enjoy more
powerful sound.
Generating a more dynamic
sound (Dynamic Bass Feed
Back)
DBFB is factory set to on.
To cancel the DBFB, press DBFB.
Adjusting the bass and treble
You can adjust the bass and treble.
Press BASS +/– or TREBLE +/– repeatedly
to adjust the level you want to set.
To adjust the bass and treble on
the unit
1
Press BASS/TREBLE on the unit repeatedly
to select “BASS” or “TREBLE”.
Each time you press the button, the display
changes as follows:
BASS
y TREBLE
2
Press +/– on the unit repeatedly to adjust the
level while “BASS” or “TREBLE” appears.
To exit the bass and treble
settings
Press any button other than BASS +/–, TREBLE
+/–, BASS/TREBLE on the unit or +/–
on the
unit.
Also, if you do not perform any operations for a
few seconds, the display automatically returns to
the original display.
You can set the system to turn off after a certain
time, so that you can fall asleep to music.
Press SLEEP.
Each time you press the button, the minute
display (the turn-off time) changes cyclically as
follows:
AUTO*
t 90min t 80min t … t 10min
t OFF
* The system automatically turns off in 240 minutes or
after the current CD finishes playing.
Other operations
** You cannot check the remaining time if you select
“AUTO”.
Tip
You can use the Sleep Timer, even if you have not set
the clock.
Sound Adjustment
Adjusting the sound
Timer
Falling asleep to music
— Sleep Timer
To Do this
Check the
remaining time** Press SLEEP once.
Change the time to
turn off Press SLEEP repeatedly to select
the time you want.
Cancel the Sleep
Timer Function Press SLEEP repeatedly until
“OFF” appears.