Sony CMT-SE1 - Manual (Page 9)

T
une
r
9 GB
To improve tuner reception
When tuner reception is poor, set CD player
power off by CD power manage function.
CD power is factory set to on.
1
Press CD (or FUNCTION on the unit
repeatedly) to switch the function to CD.
2
Press ?/1 to turn off the system.
3
Press ?/1 while holding x .
“CD PowerOff” appears.
To set CD power on
Repeat the procedure above and “CD PowerOn”
appears.
Notes
• When “CD PowerOff” is selected, disc access time is
increased.
• You cannot change the setting in Power Saving
Mode.
You can listen to a radio station either by
selecting a preset station, or by manually tuning
in the station.
Listening to a preset station
— Preset Tuning
Preset radio stations in the tuner’s memory first
(see “Presetting radio stations” on page 8).
1
Press TUNER/BAND repeatedly (or
move lever on the unit to FM or AM) to
select “FM” or “AM”.
2
Press TUNING MODE repeatedly until
“PRESET” appears in the display.
3
Press PRESET +/– repeatedly to select
the desired preset station.
Listening to non-preset radio
station
— Manual Tuning
1
Press TUNER/BAND repeatedly (or
move lever on the unit to FM or AM) to
select “FM” or “AM”.
2
Press TUNING MODE repeatedly until
both “AUTO” and “PRESET” disappear
from the display.
3
Press TUNING +/– repeatedly to tune in
the desired station.
Tips
• To improve broadcast reception, adjust the supplied
antennas, or connect a commercially available
external antenna.
• When an FM stereo program has static noise, press
FM MODE repeatedly until “MONO” appears.
There will be no stereo effect, but the reception will
improve.
• Press TUNING MODE repeatedly until “AUTO”
appears in step 2 above, then press TUNING +/–.
The frequency indication changes and scanning stops
automatically when the system tunes in a station
(Automatic Tuning).
Listening to the radio