Sony CMT-SE1 - Manual (Page 6)

6 GB
1
Press CD (or FUNCTION on the unit
repeatedly) to switch the function to
CD.
2
Insert a disc in the disc slot with the
label side up.
Notes
• When you turn on the system, the disc is not pulled
into the disc slot until “CD No Disc” appears in the
display. Do not attempt to push in the disc until “CD
No Disc” appears.
• Do not use a disc with tape, seals or paste on it as this
may cause malfunction.
This system lets you play CD in different play
modes.
1
Press CD (or FUNCTION on the unit
repeatedly) to switch the function to
CD.
2
Press PLAY MODE in stop mode
repeatedly until the mode you want
appears.
3
Press N .
Other operations
Note
You cannot change the play mode during playback.
Tip
When disc access takes a long time, set “CD PowerOn”
by CD power manage function (page 9).
CD – Play
Loading a disc
When you play
a disc, insert it
with the label
side up.
Playing a disc
— Normal Play/Shuffle Play
Select To play
No display
(Normal Play) The tracks on the disc in
original order.
SHUFFLE
(Shuffle Play) All tracks on the disc in
random order.
PROGRAM
(Program Play) The tracks on the disc in the
order you want them to be
played (see “Creating your
own program” on page 7).
To Do this
Stop play Press x.
Pause Press X. Press again to resume
play.
Select a track Press . or > repeatedly.
Find a point in a
track Keep pressing m or M during
playback and release it at the
desired point.
Remove a disc Press Z EJECT on the unit.
Track number Playing time